CONSOLE OPERATION
5
Your Computer requires 2 AA batteries (not included). Numbers listed below correlate to the above diagram.
1. Slide the monitor into the monitor clamp as illustrated above, left.
2. Snap the monitor clamp onto the handlebars.
3. Secure the monitor clamp with the screw provided.
4. Plug in the monitor wire into the RPM sensor wire.
5. Slide the RPM sensor into the sensor housing bracket 5A. Keep the front end of the RPM sensor RPM sensor 1mm to
2mm away from the magnet.
6. Peel off the double-sided tape on the wire clamp and secure it to the left fork. Insert the wire into the clamp. The RPM
sensor may shift in the bracket during this step. Adjust the sensor as needed.
CONSOLE ASSEMBLY (OPTIONAL)
