background image

 

 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 

 

3. 

Insert 1 x AA Alkaline battery into the compartment, 
observing the correct polarity (see marking inside battery 
compartment. 

4. 

Replace battery cover

 

 

DO NOT SET THE CLOCK. 

 

Note

: For best performance, batteries should be replaced at 

least once every 2 years to maintain the best running accuracy. 
Ensure that the batteries used are new and the correct size.  

 

Please help in the preservation of the 
environment and return used batteries to an 
authorized depot. 

 
SETUP AFTER CHANGING/REPLACING THE 
BATTERY 

1.  

After powering up the solar clock, all LCD segments will 
light up briefly and it will show the time (12:00), indoor 
temperature, date, and indoor humidity.  

Use switch to 
select which 
type of battery 
will be used 
before 
inserting the 
battery into 
the 
compartment 

Battery 
compartment 
cover 

Rechargeable Alkaline 
battery switch position

Primary Alkaline 
battery switch position 

 

6

2.  

Next the WWVB time code reception will automatically 
start. This reception typically takes 10 minutes in good 
conditions. If after 10 minutes the WWVB time has not 
been received, use the “SET” key to enter the set-up 
mode to manually set the Time, Time Zone and Date 
(see manual settings below). The clock will continue to 
search for WWVB each hour between 12am and 6am.  
When the clock has successfully connected with WWVB, 
it will override the manually set time and date.

 

  

Note:

 When changing the battery:  

1. 

Be careful that it does not spring free from the 
contacts.  

2. 

 Press any button 20 times with the battery 
removed.  

3. 

 Always wait at least 10 minutes after removing 
battery before re-inserting; otherwise start up 
problems may occur.

 

 

WWVB RADIO CONTROLLED TIME 

The NIST radio station, WWVB, is located in Ft. Collins, 
Colorado and transmits the exact time signal continuously 
throughout the United States at 60 kHz. The signal can be 
received up to 2,000 miles away through the internal antenna in 
the atomic clock. However, due to the nature of the Earth’s 
Ionosphere, reception is very limited during daylight hours. The 
atomic clock will search for a signal every night when reception 
is best. The WWVB radio station derives its signal from the 
NIST atomic clock in Boulder, Colorado. A team of atomic 
physicists continually measures every second of every day to 
an accuracy of ten billionths of a second a day. These 
physicists have created an international standard, measuring a 
second as 9,192,631,770 vibrations of a Cesium 133 atom in a 
vacuum. This atomic clock regulates the WWVB transmitter. 

 

After 15 minutes the WWVB tower icon in the clock display will 
start flashing in the top center of the LCD. This indicates the 
clock has detected a radio signal and is trying to receive it. 
When the time code is received, the WWVB tower becomes 
permanently lit and the time will be displayed. 

 

Summary of Contents for WT-8029U










Reviews: