background image

 

23

e-mail: 

[email protected]  

(warranty work) 

 

[email protected]  

(information on other products) 

 

web: 

www.lacrossetechnology.com  

 

Questions? Instructions? Please visit:  

www.lacrossetechnology.com/7041  

 

All rights reserved.  This handbook must not be reproduced in any form, even in excerpts, or 
duplicated or processed using electronic, mechanical or chemical procedures without written 
permission of the publisher. 
This handbook may contain mistakes and printing errors.  The information in this handbook is 
regularly checked and corrections made in the next issue.  We accept no liability for technical 
mistakes or printing errors, or their consequences. 
All trademarks and patents are acknowledged.  

FCC DISCLAIMER 

 
This device complies with part 15 of the FCC rules.  Operation is subject to the following two conditions: 

(1)

 

This device may not cause harmful interference. 

(2)

 

This device must accept any interference received, including interference that may cause 
undesired operation. 

 

FCC ID: OMO-01RX (Receiver), OMO-01TX (transmitter) 

 

Freq. 433.92 MHz 

La Crosse Technology 

Made in China 

WS-7041 

 

Summary of Contents for TX2000 Discovery
























Reviews: