background image

 

2

INVENTORY OF CONTENTS 

 

1.  The thermo station (Figure 1).   
2.  One TX6U remote temperature sensor with mounting bracket (Figure 2). 
3.  Three each, ½” Philips screws. 
4.  One strip double-sided adhesive tape. 
5.  Instruction manual and warranty card.

 

 

Additional Equipment (not included) 

1.  Two, fresh AA 1.5V batteries. 
2.  Two, fresh AA 1.5V batteries. 
3.  One, Philips screwdriver. 
 
 

 
 
 
 
 
 
 
 
 
 
 

ABOUT WWVB (Radio Controlled Time) 

 

 

The NIST (National Institute of Standards and Technology—Time and Frequency Division) 
WWVB radio station is located in Ft. Collins, Colorado, and transmits the exact time and date 
signal continuously throughout the United States at 60 kHz.  The signal can be received up to 
2,000 miles away through the internal antenna in the Weather Station.  However, due to the 
nature of the Earth’s Ionosphere, reception is very limited during daylight hours.  The weather 
station will search for a signal every night when reception is best.  The WWVB radio station 
derives its signal from the NIST Atomic clock in Boulder, Colorado.  A team of atomic 
physicists is continually measuring every second, of every day, to an accuracy of ten 
billionths of a second per day.  These physicists have created an international standard, 
measuring a second as 9,192,631,770 vibrations of a Cesium-133 atom in a vacuum.  For 
more information on the atomic clock and WWVB please see the NIST website at 

http://www.boulder.nist.gov/timefreq/stations/wwvb.htm

 

Figure 1

Figure 2 

Summary of Contents for TX2000 Discovery
























Reviews: