Please take note of the following:
•
The recommended distance to any interfering sources like computer monitors or TV sets at least
1
.
5
-
2
meters.
•
Inside ferro-concrete rooms (basements,superstructures),the received signal is naturally weakened.
In
extreme cases, please place the unit close to a window to improve the reception.
•
During night-time, the atmospheric interference is usually less severe and reception is possible in
most
cases
.A single daily reception is adequate to keep the accuracy deviation under 1 second.
•
During the operation, all successful settings will be confirmed by a brief beep tone.
•
The device will automatically quit the setting mode if no button is pressed for a long period of time.
•
Press and hold the or button in the setting mode for fast running.
7.1 Manual settings
7. Operation
SET
AL SET
•
Hold
the
button
in
normal
mode
for
three
seconds
,
to
enter
the
setting
mode
.
•
The
setting
sequence
is
shown
as
follows
:
Time Zone - DST on/off - 12
or
24
hours
system
- Hour - Minute - Year - Month - Day - Language of week.
-9-
•
Press the or button to
increase
or
decrease
for
setting
.
•
Press
and
hold
the
or
button
for
fast
running
.
•
Confirm the setting with the button
or
no
button
pressed
in
15
seconds
.
•
The manually set time will be overwritten by the
RCC
time when the signal is received successfully.
SET
AL SET
7.1.1 Setting of the time zone
•
In the setting mode you can make the time zone.
•
The time zone correction is needed for countries where the
RCC
signal can be received.
