•
The outdoor values of the outdoor transmitter will be transmitted to the
receiver
. The displays of the
out
door values are flashing "--.-".
•
On the display of the
receiver
appear the channel number.
• If receiver receive the signal, it will display the current temperature of transmitter
in
OUT
position
.
•
If the reception of the outdoor values fails within three minutes, "- -"appears on the display. Check
t
he
batteries of the transmitter and try it again. Check if there is any source of interference.
•
You can also start the outdoor transmitter search manually later on (for example when the outdoor
transmitter
i
s lost or the batteries are changed).
•
Hold the button on the
receiver
for three seconds, "---"
blinking
on the display.
•
Press the TX button in the battery compartment of the outdoor transmitter.
•
The
receiver
receives the values from the outdoor transmitter.
6.2.1 Reception of the outdoor values
-7-
•
After successful installation close the battery compartment of the outdoor transmitter carefully.
6.3 Reception of the RCC frequency signal
•
After the reception of the outdoor values, the device will now scan the
RCC
frequency signal and
the
RCC
symbol will be flashing on the display.
•
To avoid interference, the
other
buttons
(
except
)
will
no
function
during the reception
of the radio controlled clock.
•
When the time code is received successfully after 2-12 minutes, the radio-controlled time and the
RCC
sym
bol are displayed steadily in the display. The
other
buttons
are
activated permanently.
•
You can start the initialization manually.
•
Press and hold the button
for
3
seconds
. The
RCC
symbol will be flashing.
•
Interrupt the reception by pressing the button again. The
RCC
symbol disappears.
