19
5.0 DESCRIPTION OF MAIN FUNCTIONS
5.1 GRAPHIC EQUALISER
The dual 31 band equaliser has standard ISO centre frequencies, 2/3rd octave
bandwidth and 15dB cut or boost. Each of the available frequencies has a dedicated
select button below the main display. A pre EQ (Input) gain control with ±15dB range
can be used to adjust the overall signal level as EQ is applied.
Default settings (Program 00) for the Graphic page are all faders to FLAT, GAIN to
0dB and both channels are selected (Linked).
•
Press
GRAPHIC
button once to select the 'Fader' page
The display represents the positions of the faders as would be seen on a
conventional graphic equaliser.
SELECTING CHANNEL A & B:
To edit Channel A or B press it's associated
CHANNEL SELECT
button. Only
the selected channel is shown on screen and is displayed as follows –
LINKING CHANNEL A & B:
•
Press and hold
CHANNEL SELECT A
•
Press
CHANNEL SELECT B
and release both buttons together.
Both channels are displayed on screen and any editing will affect both channels
equally.
LINKING WITH OFFSET:
Offset linking on the DPF3103 means there can be different EQ and GAIN
settings for Channels A & B, which can then be linked for overall adjustment.
•
Select Channel A and make adjustments. Repeat with channel B.
•
Now link (select both) the channels and make a further cut, boost or
GAIN
change. The offset between the two channels is maintained.
At either extreme of gain (±15dB) the first fader to reach the maximum or
minimum value stops both channel faders.