L3 500-4030-000 RIPS Maintenance Manual Download | Manualshive

Page: 37 / 209

background image

COMPONENT MAINTENANCE MANUAL

AVIATION PRODUCTS

Model FA5000

Rev. 02 Page 5

July 21/17

Introduction

23

−

70–30

Use or disclosure of information on this sheet is subject to

the restrictions on the cover page of this document.

ters. Troubleshooting data is presented in a tabular form with each entry related to
a specific test and fault isolation task. Fault isolation is provided to a Level-2 mainte-
nance, or circuit board removal and replacement level.

No calibration of circuit boards within the Model FA5000 is required. The Model
FA5000 Solid-State Cockpit Voice Recorder is considered an

“ON CONDITION

LRU”.

D. DISASSEMBLY

This section provides all the information required to completely disassemble the
FA5000 to its Lowest Replaceable Unit (LRU) defined by the maintenance philoso-
phy as the circuit board assemblies. The steps of each procedure are coordinated
with the TESTING AND TROUBLESHOOTING Section. Access to subassemblies
within the FA5000 is described such that there is minimal disturbance to other sub-
assemblies.

Each major disassembly task is accompanied with a line art exploded-view of the
subassembly area which is cross referenced to the applicable Illustrated Parts List
(IPL) drawing for ordering replacement parts.

E. CLEANING

This section contains a listing of all required cleaning materials, procedures for
cleaning material use, and applicable warnings and cautions related to the use of
prescribed cleaning solvents.

F.

CHECK

This section contains the check procedures that may be required during shop main-
tenance. It covers Mechanical Inspection, Electrical Inspection and ULB Inspection
procedures.

G. REPAIR

This section contains the Model FA5000 maintenance philosophy, which provides for
Level-2 removal and replacement of failed circuit board assemblies only.

H. ASSEMBLY

This section contains detailed step-by-step procedures describing the complete as-
sembly of the Model FA5000 Solid-State Cockpit Voice Recorder. Each major as-
sembly procedure is accompanied with a line art exploded-view of the subassembly
area which is cross referenced to the applicable Illustrated Parts List (IPL) drawing
for ordering replacement parts.

The document reference is online, please check the correspondence between the online documentation and the printed version.

«
...
35
36
37
38
39
...
»

Summary of Contents for 500-4030-000 RIPS


















































































































































































































Reviews:

No comments

Related manuals for 500-4030-000 RIPS

Brand: Tascam Pages: 8

Brand: Sunsky Pages: 10

1925 Thought Tank

Brand: Dictaphone Pages: 17

Brand: Dickson Pages: 8

DIGITAL VOICE RECORDER MODEL : DDR-5000

Brand: Diasonic Pages: 46

Brand: Olympus Pages: 3

Brand: RCA Pages: 1

Brand: Knight Pages: 14

Brand: NADEX Pages: 32

COMMANDER 1900 Series

Brand: ABB Pages: 36

Brand: Hammacher Schlemmer Pages: 15

Brand: Olympia Pages: 40

Brand: Olympus Pages: 18

Brand: Panasonic Pages: 80

Brand: Magnavox Pages: 83

Brand: Safa Media Pages: 12

Reco Boy SR-160

Brand: Safa Media Pages: 16

Brand: Safa Media Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands