MPM-1000A Operator Manual
1000-7075 Rev E
4-12
Figure 4-16 Software Rollover Start Screen
10) Click
OK
when the
Software Rollover Result
window appears stating
Software Rollover Successful. (See Figure 4-17)
Figure 4-17 Software Rollover Successful Screen
11) Once the Rollover has successfully completed and you select
OK
, the
Terminal will automatically reboot. It may take up to five (5) minutes for the
system
to
re-initialize.
During
the
reboot
process
the
CDU
Communications Fault #0 screen may appear, this is normal when the
Modem is rebooting. (See Figure 4-18)
Figure 4-18 Connection Lost Status Screen
Your Modem is now updated and ready to connect to an Antenna.
Table 4-1 Software Download and Rollover Screen
Software Download
Functions
File... button
Bring up a File Selection dialog for choosing the file to download.
Start Download button
Only active if a file has been selected. When clicked, initiates the download
of the selected file to the Modem. This is the pending version. After the
download, the Modem verifies, see Figure 4-10, that the file was received
correctly and reports back.
Software Rollover button Initiates the rollover from pending to current. A dialog will appear asking for
confirmation.
