MPM-1000A Operator Manual
1000-7075 Rev E
8-13
8.7.2 NCW Message Tab
This page repeats the Terminal list from the Network page and shows the log of
messages sent and received. Right-click on an entry in the Network Terminal List to
bring up the
Send Message
dialog. Each message allows a maximum of 255
characters. Double-clicking on a message entry will display the full message. Right-click
in the
Short Message Log
list to select “
Clear,
and
Save To File
” options.
Note
An audible indication is provided when a short message is received.
The sound associated with this audible indication needs to be named
“beep.wav” and must be located in the same directory as the Modem
HCI
executable file (typically “C:\Program Files\L-3 Communications,
Linkabit Division\IP Modem H
CI”). If that file does not exist, then the
audible indication will be a beep tone at 500 Hz for a 1/2 second.
Refer to Table 8-2 NCW Message Tab for data descriptions for this window.
Figure 8-6 NCW Message Tab
When you are not viewing the Message Tab and a message is received, a flashing
visual indication of a “New Message” has arrived will be located in the bottom right
status field of the HCI application.
NOTE
A popup menu will appear when
operator right click mouse within
the Short Message Log List.
