MAINTENANCE
CLEANING THE PRINT HEAD
The
printer head
is a sensitive part of the printer and can be found on the upper
part of the printer when open.
Cau
tion: While the printer is running the printer head can be very hot.
1. Ensure that the power switch is OFF, remove the power cord, and open the
cover as outlined above in step 4. Wait several moments to ensure that the printer
head cools down.
2. Completely clean the printer head using an alcohol swab like the one provided.
Any 70% Isopropyl Alcohol pad would work. Please do not use water.
3. Wait 2-3 minutes until the alcohol has completely dried, then close the cover.
4. Connect the power cord and print a test page to check if it is clean.
PRO
TIPS
t "OZUJNF ZPVAE MJLF UP DIBOHF ZPVS MBCFM TJ[F SVO UIF BVUPNBUJD MBCFM
identification by following step 4.
t1SFTTU
he orange
feeder button
on the printer to skip a blank label.
t5
o run a self-test, press and hold the
feeder button
until you hear two short
beeps.
t"
void using poor quality labels as they can damage the printer.
t3F
gularly clean the
printer head
as outined above, under
MAINTENANCE
.
t *G
paper is jammed, turn off the printer, and allow the
printer head
to cool
down. Open the cover and ensure that the rubber is clean. If it is dirty, use an
alcohol pad to clean it. Allow the area to dry before turning the printer back on.
t*O
sert the printer’s USB into the same USB port on your computer every time
you plug it in. This will avoid creating duplicate copies of the printer on your
computer.
- 8 -
