STEP 4
LABEL SETUP
4. Close the cover carefully.
2. Pull the release latch to open the cover.
5. Turn the power ON and wait 5 seconds
for the printer to initialize.
After completing this step, the printer will begin automatic label identification. Once
the printer stops, it will have identified your label size. The next time you want to put
labels into the printer, instead of opening the printer, you can simply feed labels into
the back of the printer.
Make sure the orange guides
are touching the label sides.
The printable part of the label
should be facing up toward you.
3. Load the labels.
1. Ensure the printer is OFF.
- 7 -
