background image

PREMIER 170 PARTS LIST (Continued)

Item

Description

Part Number

45

Motor

520169

46

Mount, Motor

25835

47

Fan

570481

48

Switch, High Limit, Motor End (190°F)

571400

49

Switch, Air Proving

09925

50

Housing, Fan

26440

51

Base

26414

52

Handle,Door

26479

Contact your local L.B. White dealer for replacement parts

and service. You may also call the L.B. White Co., Inc. at 1-800-

345-7200, for assistance, or email us at

[email protected].

Be sure that you have your heater model number and

configuration number when calling.

L.B. White Co., Inc. warrants that the component parts of its

heater are free from defects in material and workmanship,

when properly installed, operated, and maintained in

accordance with the Installation and Maintenance

Instructions, safety guides and labels contained with each

unit.  If, within 24 months from the date of purchase by the

end  user, any component is found to be defective, L.B.

White Co., Inc. will at its option, repair 

or replace the defective part or heater, with a new part or

heater, F.O.B., Onalaska, Wisconsin.  

Registering your product online with L.B.White will

automatically qualify a unit and its component parts for

warranty consideration.  If a product has not been

registered with L.B.White, a copy of the bill of sale will be

required to establish warranty qualification.  If neither is

available, the warranty period will be 24 months from date

of shipment from L B. White.  

Warranty Policy

Replacement Parts and Service

HEATER

PARTS

L.B. White Co., Inc. warrants that replacement parts

purchased from the company and used on the appropriate

L. B. White equipment are free from defects both in material

and workmanship for 24 months from the date of purchase

by  the  end  user. Warranty is automatic if a component is

found defective within 24 months of the date code marked

on the part.  If the defect occurs more than 24 months later

than the date code but within 24 months from the date of

purchase by the end user, a copy of a bill of sale will be

required to establish warranty qualification. 

The warranty set forth above is the exclusive warranty

provided by L.B. White, and all other warranties, including

any implied warranties or merchantability or fitness for a

particular purpose, are expressly disclaimed.  In the event

any implied warranty is not hereby effectively disclaimed

due to operation of law, such implied warranty is limited in

duration to the duration of the applicable warranty stated

above.  The remedies set forth above are the sole and

exclusive remedies available hereunder.  L.B. White will not

be liable for any incidental or consequential damages

directly or indirectly related to the sale, handling or use of

the equipment, and in any event L.B. White's liability in

connection with the equipment, including for claims based

on negligence or strict liability, is limited to the purchase

price.  

Some states do not allow limitations on how long an implied

warranty lasts, so the above limitation may not apply to you.

Some states do not allow the exclusion or limitation of

incidental or consequential damages, so the above

limitation or exclusion may not apply to you.  This warranty

gives you specific legal rights, and you may also have other

rights which vary from state to state.

To register your product and ensure full warranty, go to
http://www.lbwhite.com/customer_care_center/product-registration/. Please have the serial number(s)
and model(s) handy for the products you are registering.

33

Summary of Contents for Premier TS080



































Reviews: