Manual I-40 y encendido de chispa
www.lbwhite.com
Manual del usuario • I-40
30
Problema 5
El calefactor hace retro-
ceder el gas a través de
la entrada del recinto
de aire.
Problema 6
El calefactor no vuelve al
ciclo de calor bajo.
Extraiga el cabezal termostático del conjunto de la válvula moduladora:
A.
Si el calefactor vuelve al nivel de fuego bajo cuando presiona el pasador del pistón de la válvula, reemplace el conjunto d
e cabezal/sensor termostá-
tico.
B.
Si el calefactor todavía no realiza el ciclo de descenso a fuego bajo, esto quiere decir que la válvula moduladora está ata
scada y debe reemplazarse.
¿Se suministra la presión
de gas adecuada al
calefactor?
¿El cordón de soldadura
del cono interior está
abierto o la punta del cono
falta o está rota?
Reemplace el cono de combustión.
Limpie estos componentes.
Ajuste las tuercas.
Reemplace
la placa del
quemador o la
junta.
Kits del cono de combustión
Número de pieza:
570130
¿El recinto de aire,
el tubo venturi, el ori
fi
cio
del quemador o el cono
interior están parcialmente
obstruidos con
polvo?
¿Las tuercas del conjunto
del quemador están
fl
ojas?
¿El cordón de soldadura
del cono interior está
alineado con la muesca de
la placa del quemador?
Ubique el cordón de
soldadura del cono interior
en la muesca de la placa
del quemador
.
¿La placa o la junta
del quemador están
agrietadas?
¿Disminuye el calor del quemador principal
cuando el cabezal termos- tático está ajustado por debajo de la temperatura
ambiente?
Compruebe que la presión
de gas sea adecuada. La
lectura de presión correcta
en el ajuste de calor alto
debe ser de 5 PSIG.
Sí
Sí
Sí
Sí
Sí
No
No
No
No
No
No