6. Input Barrel Pitch.
- Input digit more than 30.
- Drum r.p.m. is fixed between Barrel Length and Transfer is moving as per pitch.
7. Input Barrel Size.
- Insert 2 longitudinal wire in wire die with enough length to measure diameter.
- Measures distance between outside and outside of wire by a tap, and input digit.
8. As per following drawing, moves Bell Reduce Stop Proximity Switch(#3) inside until
red lamp light and fix screw tight.
.
B-PIPE is not effected by P/X Switch #2.
9. As per above drawing, moves POLE F/W, B/W to makes gap(A) 4~5mm.
- Input digit on Pole Position green bar(Left) same digit as dark green(Right)
※ If Encoder NO USE is selected from MANUAL SCREEN, moves Proximity Switch(#6)
inside and fixed screw.
10. Input Bell Size.
- BELL Expand as much as desired diameter, and P/X Switch #1 moved and fixed screw.
- If Bell Length is short, speed of Bell and Pole is running fast.
- If Bell Length is long, speed of Bell and Pole is running slow.
11. Push AUTO BACK button for Bell and Pole to be returned back completely.
12. Input Leg Length.
- Actual Leg Length to be displayed -50 mm because of wire die and welding gap.
13. Push BELL EXPAND until desired Bell diameter and move Bell Expand Stop Proximity Switch(#1)
and fix screw tight (red light "ON").
14.
Check Bell, Transfer, Pole bar of Return Complete became green color.
※ If any one bar of them in not green color, START ERROR will be happened.
15.
Push WIRE DRUM ON button and adjust Wire Guide Holder (#4 & #5) for round spiral wire.
16.
Push DRUM ROTATING button to be positioned at Welding Point(#B).
17.
Push CYLINDER button to close Cylinder to contact spiral wire to longitudinal wire.
1
2 3
A
4
5
6
7 8
B
Summary of Contents for KN-1248-G3
