10
２
Preparation
Connect the puncture unit and tubes
1. Put the upper torso manikin in spine position on the attached positioning pillow. Thread two
connection tubes
(a thick supply tube and a thin drainage tube) through the hole in the neck
of the manikin. First thread the connecter of the supply tube and then thread the drainage tube
similarly.Then close the tube cock on the water injection tube and the cock of the three-way tap
on the water drainage tube.
Water supply tube
(thick)
Water supply tube
(thick)
Water drainage tube
(thin)
Water drainage tube
(thin)
Connector
Connector
Pericardiocentesis
container
Close the tube cock on the water
supply tube
Close the cock of the three-way tap on
the water drainage tube
2. Insert the pericardiocentesis unit upward along the attaching slot from the lower side of the
manikin to the middle of the slot. Connect the two tubes that are threaded through the neck
hole to the connector located on top of the pericardiocentesis pad. There are two connectors
with different sizes. Connect each tube to the connector of the right size. Push the connectors
until you can hear a "click" sound.
Fill the Puncture Unit with Water [2]
Summary of Contents for MW15
Page 2: ......
