Kyosho MANOI AT01, Manual

Page: 54 / 106

54
工程
20
コアユニットの組み立て
作業の手順
1 1
2 2
使用するパーツ
ロアフレーム
PCBユニット
2 × 6mm
ショルダーユニットL
ショルダーユニットR
2 × 6mm
2 × 6mm
ロアフレーム
Operation20 Aseembling of Core Unit
Shoulder Unit L R
(The ones which were assembled in
Operation09)
PCB Unit
(The one which was assembled in
Operation03)
Lower Frame
2 x 6 Bind Tapping Screw x 6
Lower Frame
Lower Frame
As Figure, stand PCB Unit vertically on
Lower Frame and fix to Lower Frame by 2 of
2 x 6 Bind Tapping Screw.
Check up/down side and fornt/back side of
PCB unbit.
Insert Shoulder Unit L and Shoulder Unit R on
Lower Frame and fix by 2 each of 2 x 6 Bind
Tapping Screws.
Lower Frame is under and when face to terminal of
PCB Unit, Shoulder Unit R is at right and
Shoulder Unit L is at Left Side
Parts which is assembled in this process will
be called Core Unit.
Shoulder Unit R
Shoulder Unit L