64
1
3
4
3
2
4
5
5
6
Connect Serial USB Adaptor to
Conmector of backside of Body Frame
to connect PC and MANOI.
Start Herat To Heart3 at PC side and
check SYNC at right upper side.
Connect Battery after make sure
Switch is OFF.
Turn ON Switch and open Option
Seting Window of Heart To heart 3 by
Option Button. And, check CH5,CH6,CH9
CH11,CH14, CH15, and CH20 in ICS Setting.
Then close the window.
Next, open ICS Setting window by
ICS Button. As keep the window opening
turn OFF switchb of MANOI and ON again.
Double Click CH which were set in
process 3 to open window of setting each servo.
Choose ON from Drop Down menu, then close the
window. As same, ON the reverce of servos
which were set in process 3
After set all reverse of CH which
aere set in Process 3 ON, close
ICS Setting window and turn OFF swithc
of MANOI , then ON again.
When enter ICS Serring Mode, power of
Servo will be OFF. It is better to
make MANOI lay down because it can fall
down when Servos are OFF.
This setting will be recorded to
RCB‑3 when the window is closed.
Summary of Contents for MANOI AT01
Page 1: ......
Page 2: ...DEC2006...
