PS-1 (Printing System (1) PostScript option) 1-5
Chapter 1 Overview
●
Hardware Configuration
Basic Configuration
Configuration of the Printing System (1) + PS-1 is as follows:
•
Architecture:
IBM Compatible PC System
•
Processor:
Intel Pentium III 500 Mhz
•
Memory:
64 MB standard / 512 MB max.
•
Hard Drive:
IDE compatible 2.0 GB min.
•
Floppy Drive: 3.5" Floppy Disk
●
Host Interface
Parallel
Centronics (IEEE 1284) / compatible bi-directional
Ethernet (option)
100BaseTX and 10BaseT
The optional NC-5 card is used to connect to the Ethernet. The NC-5 is the internal
network interface card which supports multiple protocols on the Ethernet. This card
includes a CPU and flash memory with an upgradable program.
The NC-5 supports the following network protocols.
•
IPX/SPX (NetWare, Peer to Peer)
•
TCP/IP (LPD/LPR, Peer to Peer)
Refer to the corresponding operating manual for connection to the NC-5.
●
Engine Interface
IEEE 1394 (The maximum transferring rate is 200Mbps.)
Use this Engine Interface only to connect the Printing System (1) and the
Vi7360. Otherwise, system trouble may occur.
Summary of Contents for Vi7360
Page 1: ...PS 1 Printing System 1 PostScript Option INSTRUCTION HANDBOOK ...
Page 92: ...Appendix C 2 PS 1 Printing System 1 PostScript option Appendix C Font LIst Internal Font List ...
Page 93: ...PS 1 Printing System 1 PostScript option Appendix C 3 Appendix C Font List ...
Page 94: ...Appendix C 4 PS 1 Printing System 1 PostScript option Appendix C Font LIst ...
