Kyocera TASKalfa 4002i Operation Manual Download Page 283

Page: 283 / 662

6-4

Using Various Functions > Functions Available on the Machine

Configure the
settings for duplex
printing and stamp.

Form Overlay

Prints the original document overlaid with a form
or image.

page 6-50

Erase Shadowed
Areas

When scanning with the document processor or
original cover open, erase the extra shaded area.

page 6-51

Page #

Adds page numbers to the finished documents.

page 6-51

Cover

Adds a cover to the finished documents.

page 6-49

Insert Sheets/
Chapters

Insert a separator sheet, or make the first page of
the chapter the front page.

page 6-53

Image Repeat

Tiles the original image on one sheet of paper.

page 6-56

Text Stamp

You can add a text stamp on the documents.

page 6-57

Bates Stamp

You can add a bates stamp on the documents.

page 6-60

Memo Page

Delivers copies with a space for adding notes.

page 6-54

Configure the
settings for
continuous
scanning, mirror
image copies, and
Skip Blank Page
function.

Continuous Scan

Scans a large number of originals in separate
batches and then produce as one job.

page 6-63

Auto Image
Rotation

When original and paper source size are the
same, but their orientation is different, rotate
image 90 degrees when copying.

page 6-63

Negative Image

Inverts black and white portions of the image for
printing.

page 6-64

Mirror Image

Copies the mirrored image of the original.

page 6-64

Job Finish Notice

Sends E-mail notice when a job is complete. It is
also available that send a notice when a job is
interrupted.

Priority Override

Suspends the current job and gives a new job top
priority.

page 6-65

Repeat Copy

Enables additional copies in the desired quantity as
necessary after a copy job is completed.

page 6-66

DP Read Action

When the document processor is used, select
the scanning operation for the document
processor. This function is displayed when the
document processor is installed.

page 6-67

Skip Blank Page

When there are blank pages in a scanned
document, this function skips the blank pages
and prints only pages that are not blank.

page 6-67

Tab

Function key

Description

Reference

page

Layout/Edit

Advanced

Setup

Summary of Contents for TASKalfa 4002i























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 4002i

Reviews:

Brands by name

Popular brands

Kyocera TASKalfa 4002i, Operation Manual

Search results

Summary of Contents for TASKalfa 4002i

Reviews:

Brands by name

Popular brands