Kyocera TASKalfa 4002i, Operation Manual

Page: 335 / 662

6-56
Using Various Functions > Functions
Image Repeat
Tiles the 1 copied sheet with an original image. You can also specify the area of the original to repeat.
Zoom Priority
Double Copy
Repeat an image of specified zoom ratio.
Copy two image.
Item Value Description
Off
Zoom Priority 25 to 400% (in 1%
increments) Set the default screen.
Select [
+ ] or [ - ] to change the displayed magnification as
desired. Select [ # Keys ] to use the numeric keys for entry.
Specify
Repeat
Area Off
On:
Start Metric
*1
X1: 0 to 431 mm
Y1: 0 to 296 mm
Inch
X1: 0.00 to 16.99"
Y1: 0.00 to 11.68"
*1 The input units can be changed in System Menu.
Measurement (page 8-15)
To set the area of the original to be repeated, select [ On ] for
"Specify Repeat Area".
Select [
+ ] or [ - ] to input the area of the original to be repeated.
Select [ # Keys ] to use the numeric keys for entry.
Y1: Length from top left of
platen to top edge of repeat
area
X1: Length from top left of
platen to left edge of repeat
area
Y2: Height of repeat area
X2: Width of repeat area
On:
Area Metric
X2: 1 to 432 mm
Y2: 1 to 297 mm
Inch
X2: 0.01 to 17.00"
Y2: 0.01 to 11.69"
Double
Copy
―
Makes 2 copies of the same original on a single sheet.
For example, you can double-copy an A5 original onto an A4
sheet which you then cut in half to make 2 copies that are
identical to the original.
Copy
Layout/Edit
Original Copy
Original Copy