Kyocera TASKalfa 4002i Operation Manual Download Page 100

Page: 100 / 662

2-35

Installing and Setting up the Machine > Network Setup

Display the screen.

Select [Maintenance].

[Wi-Fi Setup Tool] > [OK]

Configure the settings.

[

Do not use automatic configuration

] > [

Next

] > [

Next

]

[

Wi-Fi Direct

] > [

Next

] > [

Next

]

[

Advanced setup

] > [

Next

]

Select [

Express

] or [

Custom

] as device discovery method and specify the IP address or

host name to search the machine.

Select the machine > [

Next

]

Select [

Use the device settings.

] on [

Authentication mode

], and enter the login user

name and password. Login user name and Password are both Admin.

Configure the communication settings > [

Next

]

Change the settings of access point as necessary > [

Next

]

The network is configured.

NOTE

• Installation on Windows must be done by a user logged on with administrator privileges.
• If the "

Welcome to the Found New Hardware Wizard

" dialog box displays, select

[

Cancel

• If the autorun screen is displayed, click [

Run setup.exe

• If the user account management window appears, click [

Yes

] ([

Allow

]).

1 Click [

View License Agreement

]

and read the License Agreement.

2 Click [

Accept

Summary of Contents for TASKalfa 4002i























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 4002i

Reviews:

Brands by name

Popular brands

Kyocera TASKalfa 4002i, Operation Manual

Search results

Summary of Contents for TASKalfa 4002i

Reviews:

Brands by name

Popular brands