38
Using the Camera
9
U
SING
THE
C
AMERA
Tips before operating
your camera
• While the camera is active, the home screen
acts as the viewfinder.
• If you get a “Low memory” error, check and
adjust your resolution and quality
compression settings. See “Setting up the
camera for photos” on this page.
• You can only activate the camera if you are not
on an active call or browsing files in the
Media Gallery.
• If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous launch point.
• Menu settings and options can only be
accessed when the camera is active.
Accessing camera and
video modes
The camera can be used with the slide open
or closed.
With the camera open or closed:
• Press and hold
to activate camera
viewfinder.
• Press
until you hear two beeps to activate
video mode.
With the camera open:
• Press and hold
to activate the camera
viewfinder.
• Select
Options
→
Video Mode
to switch to
video mode.
- or -
– Select
Menu
→
Camera
to activate
the camera.
– Select
Options
→
Video Mode
to switch to
video mode.
Setting up the camera for
photos
1.
With the slide open, select
Menu
→
Camera
→
Options
.
2.
Press
to select
Settings
.
3.
Highlight an option and press
:
–
Flash
options are On, Off, or Automatic.
–
Resolution
options are 640 x 480,
320 x 240 (best for sending to email),
and 160 x 120.
–
Low Light Mode
brightens the picture for
low light environments.
82-N8963-3EN.book Page 38 Thursday, September 21, 2006 9:04 AM
