Kyocera KM-2810, Service Manual

Page: 69 / 180

2H9
1-3-45
U917
Setting backup data reading/writing
Description
Retrieves the backup data to a USB memory from the machine; or writes the data from the USB memory to
the machine.
Purpose
To store and write data when replacing the control PWB.
Method
1. Press the power key on the operation panel, and after verifying the power indicator has gone off, switch
off the main power switch.
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
4. Enter the maintenance item.
5. Press the start key.
6. Select [Export] or [Import].
7. Select the item using the cursor left/right keys.
*: Since data are dependent with each other, data other than those assigned are also retrieved or written
in.
8. Select ON using the cursor left/right keys.
Wait for 10 seconds before pressing the Start key to allow the machine to recognize the USB memory.
9. Press the start key. Starts reading or writing.
The progress of selected item is displayed in%.
When an error occurs, the operation is canceled and an error code is displayed.
10. When normally completed, [FIN] is displayed.
11. Turn the main power switch off and on after completing writing when selecting IMPORT.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
IMPORT Writing data from the USB memory to the machine
EXPORT Retrieving from the machine to a USB memory
Display Description Description
ADDRESS BOOK Address book -
JOB ACCNT. Job accounting -
ONE TOUCH Information on one-touch Address book
USER User managements Job accounting
PROGRAM Program information Job accountings and user managements
DOCUMENT BOX Document box information Job accountings and user managements