Kyocera KM-2810, Service Manual

Page: 34 / 180

2H9
1-3-10
U034
Adjustment: Center line adjustment
1. Select the item to be adjusted.
*: Setting the difference value from reference value
2. Press the system menu key.
3. Press the start key to output a test pattern.
4. Press the system menu key.
5. Change the setting value using the cursor left/right keys.
For output example 1, decrease the value. For output example 2, increase the value.
Figure 1-3-2
6. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
Maintenance
item No.
Description
Display Description Setting
range Initial
setting Change in
value per step
LEFT Adjustment of reference value 0 to 1180 235 1 dot
MP TRAY Paper feed from MP tray* -70 to 70 0 1 dot
CASSETTE 1 Paper feed from cassette 1* -70 to 70 0 1 dot
CASSETTE 2 Paper feed from optional cassette 2* -70 to 70 0 1 dot
CASSETTE 3 Paper feed from optional cassette 3* -70 to 70 0 1 dot
DUPLEX Duplex mode (second side)* -70 to 70 0 1 dot
Center line of printing
Correct image Output
example 1
Output
example 2
U034
U067
(P.1-3-16)
U072
(P.1-3-21)