Kyocera KM-2810, Service Manual

Page: 63 / 180

2H9
1-3-39
U404
Adjusting margins for scanning an original from the DP
Description
Adjusts margins for scanning the original from the DP.
Purpose
Make the adjustment if margins are incorrect when the optional DP is used.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode.
Adjustment
1. Press the start key.
2. Select the item to be adjusted.
3. Press the system menu key.
4. Place an original on the DP and press the start key to make a test copy.
5. Press the system menu key.
6. Change the setting value using the cursor left/right keys.
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
Figure 1-3-16
7. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
U403
(P.1-3-38)
U402
(P.1-3-37)
U404
Display Description
Setting
range Initial
setting Change in
value per step
A Margin Left margin 0 to 10.0 3.0 0.5 mm
B Margin Leading edge margin 0 to 10.0 2.5 0.5 mm
C Margin Right margin 0 to 10.0 3.0 0.5 mm
D Margin Trailing edge margin 0 to 10.0 4.0 0.5 mm
Leading edge margin
(3±1.5 mm)
Trailing edge margin
(2±1.0 mm)
Left margin
(2±1.0 mm)
Right margin
(2±1.0 mm)