2HJ/2HK-1
2-1-28
(2) Fuser unit (20/22 ppm printer [EUR/USA model])
The fuser unit is composed of the heat roller, press belt, fuser heater lamp 1, and the change guide. Paper sent from the
secondary transfer and separation section is applied with heat and pressure to permanently fuse toner on paper. The
change guide switches the destination of paper to the face-down tray or optional face-up tray. It also sends paper to the
duplexer.
Figure 2-1-38Fuser unit (20/22 ppm printer [EUR/USA model])
1.
Fuser UP cover
2.
Entrance guide
3.
Exit guide
4.
Exit UP guide
5.
Fuser A stay
6.
Fuser B stay
7.
Fuser C stay
8.
Separator plate
9.
Change guide
10. Press plate
11. Exit roller
12. Exit pulley
13. Press belt rollers
14. Heat roller
15. Press belt
16. Heater lamp
17. Exit sensor (actuator)
18. Fuser thermostat 1
Downloaded from
www.Manualslib.com
manuals search engine
