Kyocera FS-C5015N Service Manual Download Page 138

Page: 138 / 192

2HJ/2HK

1-6-2

(1) Downloading the firmware from the memory card

The procedure below provides how to download firmware from a memory card. Note that you can download both the sys-
tem and engine firmware at a time.

Procedure

1. Turn printer power off.
2. Insert the memory card into the printer's

memory card slot.

Figure 1-6-2

3. Turn printer power on.
4. Press MENU key on the printer's operation

panel and carry out the memory card for-
matting procedure (1).

5. When formatting is complete, turn printer

power off.

Figure 1-6-3

6. Remove the formatted memory card from

the memory card slot.

7. Insert the memory card to the PC's slot or to

the adaptor.

8. Copy the firmware file to download to the

root directory of the memory card.

9. Remove the memory card from the PC's slot

or the adaptor.

Figure 1-6-4

Memory card slot

Memory card

Message display

Operation panel keys

Press the MENU key.

Press the OK key.

Press the

key.

Press the

key.

Press the

key.

(Format information is
automatically printed.)

(1)

Memory Card >

>Format

>Format ?

Processing

Ready

To PC

Memory card

Adapter
(Memory card reader/writer)

Downloaded from

www.Manualslib.com

manuals search engine

Summary of Contents for FS-C5015N

































































































































































































Search results

Summary of Contents for FS-C5015N

Reviews:

Related manuals for FS-C5015N

Brands by name

Popular brands

Kyocera FS-C5015N, Service Manual

Search results

Summary of Contents for FS-C5015N

Reviews:

Related manuals for FS-C5015N

Brands by name

Popular brands