2-18
Installing and Setting up the Machine > Energy Saver function
Network, Card Reader (Sleep Level Set.)
You can set whether sleep mode operates for each function. When the machine enters sleep mode, the ID card cannot
be recognized.
For more information on Sleep Level Set., refer to the following:
Sleep Level Set. (page 7-15)
Sleep Level (Energy Saver and Quick Recovery) (models except for Europe)
For sleep level, you can toggle between the following two modes: Energy Saver mode and Quick Recovery mode. The
default setting is Energy Saver mode.
Energy Saver mode reduces power consumption even more than Quick Recovery mode, and allows Sleep Mode to be
set separately for each function. The ID card cannot be recognized.
To resume, select the [
Go
] key on the operation panel. If print data is received during Sleep, the machine automatically
wakes up and starts printing.
Follow the steps below to select the sleep level and use Energy Saver mode for each function.
1
Display the screen.
1
[
Menu
] key > [
▲
] [
] key > [
Device Common
] > [
►
] key > [
▲
] [
] key >
[
Sleep Level Set.
] > [
►
] key
2
Enter the administrator ID and select the [
OK
] key.
3
Enter the administrator password and select the [
OK
] key.
4
[
▲
] [
] key > [
Sleep Level
] > [
OK
] key
2
Select the Sleep level.
[
▲
] [
] key > [
Quick Recovery
] or [
Energy Saver
] > [
OK
] key
When [
Energy Saver
] is set, next go on to set whether or not to use Energy Saver mode for
each function.
3
Set the Sleep rule.
1
[
▲
] [
] key > [
Network
] or [
Card Reader
] > [
OK
] key
[
Card Reader
] is displayed when the optional Card Authentication Kit is activated.
2
[
▲
] [
] key > [
Off
] or [
On
] > [
OK
] key
NOTE
If the optional Network Interface Kit is installed, Energy Saver cannot be specified.
NOTE
Enter an ID consisting of between 1 and 16 numbers.
Select the [
▲
] or [
▼
] key to enter a number.
Select the [
◄
] or [
►
] key to move the cursor left or right.
The factory default settings for the administrator ID is 3000.
NOTE
Enter a password consisting of between 0 (no settings) and 16 numbers.
Select the [
▲
] or [
▼
] key to enter a number.
Select the [
◄
] or [
►
] key to move the cursor left or right.
The factory default settings for the administrator password is 3000.
Summary of Contents for ECOSYS P6130cdn
