Kyocera ECOSYS P6130cdn, Operation Manual

Page: 177 / 236

9-11
Troubleshooting > Troubleshooting
Printouts are curled. Is the paper damp? Replace the paper with new paper. page 3-2
Cannot print. Is the machine plugged in? Plug the power cord into an AC outlet. ―
Is the machine powered on? Turn on the power switch. page 2-8
Are the USB cable and network cable
connected? Connect the correct USB cable and
network cable securely. page 2-6
Cannot print with USB
memory.
USB memory not
recognized. Is the USB host blocked? Select [ Unblock ] in the USB host
settings.
page 7-21
― Check that the USB memory is securely
plugged into the machine. ―
Dirt on the top edge or back
of the paper. Is the interior of the machine dirty? Clean the interior of the machine. page 9-2
Part of the image is
periodically faint or shows
white lines. ― Open and then close the rear cover. page 2-2
― Select the [ Menu ] key > [ Adjust/
Maintenance ] > [ Service ] > [ MC ] and
decrease the adjustment value.
Decrease the adjustment value 1 level
at a time from the current value. If there
is no improvement after the value is
decreased by 1 level, decrease by 1
level again. If there is still no
improvement, return the setting to the
original value.
―
Skewed-color printout. ― Run [ ColorCalibration ]. page 9-21
― Run [ Color Regist. ]. page 9-21
Colors appear different than
you anticipated. When printing from a computer
Adjust the color using the printer driver.
―
The previous image remains
and lightly printed. ― Select the [ Menu ] key > [ Adjust/
Maintenance ] > [ Service ] > [ MC ] and
increase the adjustment value. Increase
the adjustment value 1 level at a time
from the current value. If there is no
improvement after the value is
increased by 1 level, increase by 1 level
again. If there is still no improvement,
return the setting to the original value.
―
Symptom Checkpoints Corrective Actions
Reference
Page