Kyocera Copystar CS-1635, Service Manual

Page: 46 / 244

2HA/2HB
1-3-14
U034
(cont.)
Adjustment: trailing edge margin adjustment
1. Select group 3 using the image mode selection key.
2. Press the interrupt key.
3. Press the start key to output a test pattern.
4. Change the setting value using the zoom +/- keys.
For output example, increase the value.
Figure 1-3-3
5. Press the start key. The value is set.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
U035
Setting folio size
Description
Changes the image area for copying onto folio size paper.
Purpose
To prevent the image at the trailing edge, or right or left side of the paper from not being copied by setting the
actual size of the folio paper used.
Method
Press the start key.
Setting
1. Select the item to be set using the exposure adjustment keys.
2. Change the setting using the zoom +/- keys.
3. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Description Setting
range Initial
setting Change in
value per step
Trailing edge margin adjustment -4.0 to 10.0 0.0 1.0 mm
Correct image Output
example
Trailing edge margin
Exposure indicator Setting Setting range Initial setting
Exp. 1 Length 330 to 356 mm 330
Exp. 2 Width 200 to 220 mm 210