Kyocera COMMAND CENTER, Operation Manual

Page: 41 / 58

COMMAND CENTER Pages
Operation Guide 37
Advanced > Protocols > Netware
This printing system supports both NDS and bindery printing in either print server mode
or remote printer mode.
NetWare setup requires installation of the following client software and logon with
Administrator Privileges. If you are unsure, please contact your network administrator.
With Novell Client, creation of the NetWare print objects with the AdminManager
NetWare Setup Wizard requires the NetWare Client from Novell. For NetWare printing,
you may use the NetWare Client from either Novell or Microsoft.
For Admin Privileges, network operations (creating queues etc.) require 'admin' or
'supervisor' privileges (or equivalent). Certain portions of AdminManager may be
inoperable if you attempt those operations without sufficient privileges.
Start of Job
String
Specifies the character string sent to the printer before
output directly to the output port (lp port). Specifies the
character string if it is necessary to transmit the control code
before printing.
End of Job
String
Specifies the character string sent to the printer after directly
outputting to the output port (lp port). Specify a character
string, if it is necessary, to send a control code after printing.
Item Description
Item Description
NetWare
Protocol
Enables or disables the Network Protocol.
Bindery Mode
Enables or disables Bindery Mode.
Frame Type
Sets the Frame type. You can choose from Auto , 802.3 ,
Ethernet-II , SNAP or 802.2 .
File Server
(Primary)
Enter the name of the primary File Server.
NDS Tree
Enter the name of the NDS Tree.
NDS Context
Enter the NDS Context.
Print Server
Mode
Enables or disables Print Server Mode.
Print Server
Name
Enter the Print Server Name.
Queue Polling
Interval
Enter the Queue Polling Interval in seconds.
Password
(optional)
Enter the Password, if required. Login to NetWare will be
successful only if the password set here matches the Print
Server password set within the NetWare utilities.