Kyocera COMMAND CENTER, Operation Manual

Page: 46 / 58

COMMAND CENTER Pages
42 KYOCERA COMMAND CENTER
Advanced > Management > SNMP > SNMPv1/v2c
The SNMP protocol is used for providing and transferring management information
within the network environment. Should an error occur such as
Add Paper , the printing
system automatically generates a trap , an error message sent to up to two pre-
determined trap recipients.
POP3 Server
Timeout
Enter the timeout in seconds during which this machine tries
to connect to the POP3 server.
Login User
Name
Enter the login name of the user.
Login
Password
Enter the password for connecting to the user name above.
Use APOP
Enables or disables APOP.
Test
This will test one transmission for each press.
Delete e-mail
after retrieval
Enables or disables the Delete E-mail after retrieval function.
E-mail size limit
Enter maximum E-mail size in Kilobytes. When the value is 0,
the limitation for E-mail size is disabled.
Cover Page
Specifies whether to print the body of E-mail in addition to the
attached files.
When this item is set to
On , the attached files and the body
of E-mail are printed.
When no attached files exist, only the body of E-mail is printed.
When this item is set to
Off , only the attached files are printed.
When no attached files exist, nothing is printed.
Item Description
Item Description
SNMPv1/v2c
Sets whether to use the SNMPv1/v2c protocol. Set On to use
it. After you have changed this setting, you must restart this
machine.
Read
Community
The read community can be used like a password. The
default read community name is
public . After you have
changed this setting, you must restart this machine. When a
management application sends an SNMP request to read a
value, it must include the correct read community name or
the request will be rejected by the printing system.
Write
Community
Similar in function to the read community, but used in SNMP
requests to write (change) a value.The default write
community name is
public . After you have changed this
setting, you must restart this machine.
sysContact
The MIB-II sysContact object, usually the E-mail address of
the network administrator.