COMMAND CENTER Pages
Operation Guide
47
Advanced > Security > IPSec > General
This page allows you to set access restrictions for IPSec protocol-based communication.
Authentication
Type
Selects either EAP-TLS or PEAP (EAP-MS-CHAPv2) for the
authentication type.
Login User
Name
Enter the name of the user who accesses the printing
system. The IEEE802.1x client certificate of this user must
be valid.
Login Password
You can set a PEAP-based password. (This setting is valid
when PEAP (EAP-MS-CHAPv2) authentication type is
selected.)
Common Name
Specifies the common name of the server certificate if the
server is required to be authenticated. (This setting is valid
when PEAP (EAP-MS-CHAPv2) authentication type is
selected.)
Match Rule of
Common Name
When the server certificate is verified, the common name
specified under
Common Name
is compared with the
common name on the server certificate. This item allows you
to specify whether the common names are considered to be
matched if they exactly or partially match. (This setting is valid
when PEAP (EAP-MS-CHAPv2) authentication type is
selected.)
Certificate
Status
Displays whether the certificate is valid or not.
Item
Description
Item
Description
IPSec
Specifies whether or not to enable the IPSec protocol. Select
On
to enable the IPSec protocol. Select
Off
to disable it.
Restriction
Specifies the default policy for non-IPSec packets.
Select
Allow
to allow communication with all hosts and
networks including those not permitted by the rules described
under
Advanced > Security > IPSec > Rule1 (to Rule3)
on
page 48. Select
Deny
to allow communication only with the
hosts and networks permitted by the rules.
Authentication
Type
Specifies the authentication type used for IKE phase1. To set
a character string as the shared key and use it for
communication, select
Pre-shared
and enter the string of
the pre-shared key in the text box. To use a CA-issued
device certificate or root certificate, select
Certificates
.
When you select
Certificates
, the contents of the CA
certificate and root 1 to 3 certificates are displayed if they are
enabled. When you click the
CA
or
Root
button, you can
view, import or delete CA-issued or root certificates.
Rule1 (to Rule3)
Shows whether the set rule is enabled or disabled. To enable
or disable the rule, refer to
Advanced > Security > IPSec >
Rule1 (to Rule3)
on page 48.
Summary of Contents for COMMAND CENTER
