2DC
1-6-44
Start
Enter maintenance mode.
Enter “051” using the copy exposure
adjustment keys or zoom +/- keys.
Yes
Yes
No
No
Press the start key.
Exp.1 (lit): Drawer
Exp.2 (lit): Bypass tray
Exp.3 (lit): Optional drawer
Press the program key and the
machine enters the test copy mode.
Press the start key
to make a test copy.
Decrease the value using the zoom (–) key.
Setting range: –50 – +50
Initial setting: 0
Changing the value by 1 changes
the amount of slack by 0.32 mm.
The greater the value,
the larger the amount of slack;
the smaller the value, the smaller
the amount of slack.
The new setting is stored.
Select the item to be adjusted using
the copy exposure adjustment keys.
Is the leading
edge of the image missing
or varying randomly (copy
example 1)?
Is the copy
paper Z-folded (copy
example 2)?
Increase the value using the zoom (+) key.
Press the start key.
End
Press the stop/clear key to
exit maintenance mode.
(4) Adjusting the amount of slack in the paper
Make the following adjustment if the leading edge of the copy image is missing or varies randomly, or if the copy paper is
Z-folded.
Procedure
Original
Copy
example 1
Copy
example 2
Figure 1-6-54