2DC
1-6-41
Yes
No
Start
Enter maintenance mode.
Enter “034” using the copy exposure
adjustment keys or zoom +/- keys.
Press the start key.
Press the program key and the
machine enters the test copy mode.
Is the leading edge
registration correct?
Press the start key
The new setting is stored
Press the stop/clear key to exit
maintenance mode.
End
Select the items to be adjusted using
the copy exposure adjustment keys.
For output example 1, decrease
the value using the zoom (–)
key.
For output example 2, increase
the value using the zoom (+)
key.
Setting range: –3.0 – +3.0
Initial setting: 0.0
Changing the value by 1 moves the
leading edge by 1.0 mm.
Press the start key
to output a test pattern.
Exp. 1 (lit): Leading edge registration
from the drawer
Exp. 2 (lit): Leading edge registration
from the bypass tray
1-6-17 Adjustment the maintenance mode
(1) Adjusting the leading edge registration of image printing
Make the following adjustment if there is a regular error between the leading edges of the copy image and original.
U034
U066
(P. 1-6-47)
U071
(P. 1-6-51)
Caution:
Check the copy image after the adjustment. If the image is still incorrect, perform the above adjustments in maintenance
mode.
Procedure
Correct image
Output
example 1
Output
example 2
Leading edge registration
Figure 1-6-51
