Kyocera Mita Ecosys FS-3800, Operation Manual

Page: 70 / 306

Using the Operator Panel
1-58
Setting the Character Pitch for Courier/Letter Gothic
You can set the character pitch for fixed fonts when the default font is
Courier or Letter Gothic.
1
Press the
MENU
key.
2
Press the or key repeatedly until
Font >
appears.
3
Check that
Internal
is displayed and press the > key.
4
Press the or key repeatedly until
>Pitch
appears.
5
Press the ENTER key. A blinking cursor (
_
) appears.
6
Press the or key to increase or decrease the value of the figure
where the cursor is blinking. The character pitch can be set between
0.44 and 99.99 characters per inch, in 0.01 character-per-inch
increments. You can use the > or < keys to move the cursor right and
left.
If you want to abandon the setting procedure, press the
CANCEL
key.
7
When the desired size is displayed, press the
ENTER
key.
8
Press the
MENU
key. The message display returns to
Ready
.
>Pitch
MENU
Font >
Internal
?
>Pitch
10.00 cpi
ENTER >Pitch
10.00 cpi
ENTER
MENU