Kyocera Mita Ecosys FS-3800, Operation Manual

Page: 60 / 306

Using the Operator Panel
1-48
Printing a Network Card Interface Status Page
To use this function, the network interface card must be installed on the
printer.
You can print out a status page for the network interface. The network
interface card status page shows the firmware version, the network
addresses, and other information under various network protocols about
the network interface card. The default setting is
Off
(not print). If the
setting is changed to
On
(print) as follows, however, the network interface
status page will be printed when the printer status page is printed.
Printing out a network interface card status page may not be possible
with some network interface cards. For details, see the manual for the
network interface card.
1
Press the
MENU
key.
2
Press the or key repeatedly until
Interface >
appears.
3
Press the
ENTER
key. A blinking question mark (
?
) appears.
If you want to abandon the interface selection procedure, press the
CANCEL
key. The interface remains unchanged.
4
Press the or key repeatedly until
Option
appears.
5
Press the
ENTER
key again. A
>
appears.
Option
Note
MENU
Interface >
Parallel
ENTER
Interface
? Parallel
Interface
? Option
ENTER Interface >
Option