Kyocera Mita Ecosys FS-3800, Operation Manual

Page: 122 / 306

Using the Operator Panel
1-110
Overriding A4 and Letter Size Difference
This selects whether to enable or disable the difference between A4 size
and Letter size. Under the default setting of
Off
, the paper size of the
paper source is matched to the paper size formatting the jobs. If these
differ, a corresponding error message is displayed. When this is set to
On
,
printing is performed even if the actual paper size differs from the paper
size formatting the jobs.
1
Press the
MENU
key.
2
Press the or key repeatedly until
Paper Handling >
appears.
3
Press the > key.
4
Press the or key repeatedly until
>Override A4/LT
appears.
5
Press the
ENTER
key. A blinking question mark (
?
) appears.
6
Select
On
or
Off
using the or key.
7
Press the
ENTER
key.
8
Press the
MENU
key. The message display returns to
Ready
.
>Override A4/LT
MENU
Paper Handling >
?
>Override A4/LT
Off
ENTER
>Override A4/LT
? Off
ENTER
MENU