KYMCO People GT 300i, Service Manual

Page: 198 / 223

16
. BATTERY/CHARGING SYSTEM
16-4
People GT 300i
BATTERY
REMOVAL
The battery is under the floorboard.
Remove the two screws attaching the battery
cover.
Pull battery out to expose the terminal leads.
Disconnect the negative (-) terminal lead
from the battery first, then disconnect the
positive (+) terminal lead.
Remove the battery from the battery box.
BATTERY INSTALLATION
Install in the reverse order of the removal.
VOLTAGE INSPECTION
Remove the battery cover.
Measure the battery voltage by using a
commercially available digital multimeter.
Voltage (20ºC/68ºF):
Fully charged: 13.0 ~ 13.2 V
Insufficient charged: < 12.3 V
When install the battery, first connect
the positive (+) cable and then negative
(-) cable to avoid short circuit.
＊
(-) Terminal
(+)
Terminal