4
SICOM3016BA Bare Board (unit: mm)
Figure 4 SICOM3016BA (Bare Board)
3.2 Mounting Modes and Steps
As mentioned in the first chapter, SICOM3016BA has two forms, that is,
integrated device and bare board. A bare board can be directly installed in
the target device, while the integrated device supports panel mounting.
Detailed steps are as follows:
Panel Mounting (Integrated Device)
Step 1: Select the mounting position on a wall or an inner wall of a
cabinet for SICOM3016BA and guarantee adequate space for
it.
Step 2: Punch four holes in the selected position according to the
dimensions of SICOM3016BA. Insert four screws into the four
holes respectively, and turn the screws with a screwdriver until
about a 5mm distance is left between each screw head and
the wall.
Step 3: Make the four screws pass through the middle (the part with
120
105
80
5
45
80
40
75
161
64
235
13
0
