18
Figure 26 Setting Port Parameters
Step 6: Click OK to enter the switch CLI. Then you can run the following
commands to perform operations.
Table 8 CLI Commands
View
Command
Description
User view
SWITCH>enable
Enter the management view.
Management view
SWITCH#show interface
Query the IP address of the switch.
Management view
SWITCH#show version
Query the version of the switch.
Management view
SWITCH#reboot
Restart the switch.
Management view
SWITCH#load default
Restore the factory default settings
(excluding the IP address).
Management view
SWITCH#config terminal
Enter the configuration view.
6.2
Access through Telnet
Step 1: Connect the network port of a PC to the 10/100Base-T(X) port or
debug port of the switch with an RJ45-RJ45 network cable.
Step 2: Enter "telnet
IP-address"
in the Run dialog box, as shown in Figure
27. The default IP address of a Kyland switch is 192.168.0.2.
