KYLAND Technology SICOM3000, Hardware Installation Manual

Page: 14 / 40

Mounting
8
3.2 Mounting Modes and Steps
The series switches support DIN-rail and panel mounting. Before
installation, make sure that the following requirements are met.
1) Environment:temperature (-40
ć
to 85
ć
), ambient relative humidity
(5% to 95%, non-condensing)
2) Power requirement:The power input is within the voltage range of
the switch.
3) Grounding resistance:<5
Ω
4) No direct sunlight, distant from heat source and areas with strong
electromagnetic interference.
Step 1:Select the mounting position for the device and guarantee adequate
space and heat dissipation (dimensions:75mm×140mm×123mm).
Step 2:Insert the connecting seat onto the top of the DIN rail, and push
the bottom of the device inward and upward to ensure the DIN
rail fits in the connecting seat. Make sure the device is firmly
installed on the DIN rail, as shown in the following figure.
Figure 6 DIN-Rail Mounting
ƽ
DIN-Rail Mounting
3.2.1 Mounting
1
2
DIN rail
connecting seat
DIN rail