KYLAND Technology SICOM3000, Hardware Installation Manual

Page: 28 / 40

Connection
22
The following table lists the pin definitions of the 5-pin 5.08mm-spacing
plug-in terminal block.
Table 8 Pin Definitions of 5-Pin 5.08mm-Spacing Plug-in Terminal Block
Step 1: Ground the device properly according to section 4.5.
Step 2: Remove the power terminal block from the device.
Step 3: Insert the power wires into the power terminal block according
toTable 8 and secure the wires.
Step 4: Insert the terminal block with the connected wires into the
terminal block socket on the device.
Step 5: Connect the other end of the power wires to the external
power supply system according to the power supply
requirements of the device. View the status of the power
LEDs on the front panel. If the LEDs are on, the power is
connected properly.
ƽ
Wiring and Mounting
No. Signal DC Definition AC Definition
1 +/L PWR1: + PWR1: L
2 -/N PWR1: - PWR1: N
3 PGND PGND
4 -/N PWR2: - PWR2: N
5 +/L PWR2: + PWR2: L
Caution:
For single power supply, only pins 1, 2, and 3
(PWR1) of the terminal block can be connected. Do
not use pins 4 and 5.