KYLAND Technology SICOM3000, Hardware Installation Manual

Page: 16 / 40

Mounting
10
Figure 8 Panel Mounting
ƽ
Panel Mounting
3.2.2 Panel Mounting
Screw
Screw
2
1
Ф 6.5
Ф 4
Note:
Purchase the plate (optional) for panel mounting.
Step 1:Use screws to secure the plate for panel mounting to the rear
panel of the device.
Step 2:Select the mounting position (on a wall or inner wall of a
cabinet) for the device and guarantee adequate space and heat
dissipation (dimensions:75mm×140mm×123mm).
Step 3:Punch four holes in the selected position according to the
dimensions for panel mounting. Insert four screws into the four holes
respectively, and turn the screws with a screwdriver until about
a 5mm distance is left between each screw head and the wall.
Step 4:Align the four mounting holes on the plate for panel mounting
with the four screws. Insert the screws through the
Ф 6.5 positions
in the following figure. Move the device in direction 1 until the
screws are in the
Ф 4 positions. Then tighten the screws.