SICOM Series CLI Command Manual
40
Note:
To set DT-Ring+, a DT-Ring domain should be created firstly.
10.2.2 Create/Delete backup ports
In DT-Ring+, we need to set two backup ports to compose the backup redundant rings.
Create a backup port
KYLAND(config)#dt <1-32>
KYLAND(config-dt-ring-1)#backport add <1,26>
The parameter <1-32> : Domain ID
The parameter<1-10> : Port ID
Delete a backup port
KYLAND(config)#dt <1-32>
KYLAND(config-dt-ring-1)#backport delete <1,26>
The parameter <1-32> : Domain ID
The parameter <1-10> : Port ID
Note:
Only two backup ports are allowed, no more no less. Or the ring cannot
work normally.
10.2.3 Display the status of DT-Ring+
The command displays the information of backup ports.
Display the status of DT-Ring+
KYLAND#show dt <1-32>
The parameter <1-32> : Domain ID
