SICOM Series CLI Command Manual
11
1.2.6 Save configuration and restore default configuration
To save current configurations
KYLAND# save
To restore default configuration
KYLAND# load default
Note:
If users want to reset switch’s start configuration information, use this command to delete
former configuration.
1.3 Switch Management Methods
SICOM series industrial Ethernet switches are mainly managed by the following methods:
Connecting a terminal (or terminal emulation software) with switch’s Console port
to access switch’s CLI
Using Telnet to manage switch
Using SNMP to manage switch
Using WEB to manage switch
1.4 Console Management
Using Console RJ45 serial port at the front panel of switch to connect with switch’s built-in
CLI interface. For SICOM series switch, the configuration of Console port is as below:
Baud Rate
9600
Bit
8
Parity
None
Stop Bit
1
Flow Control
None
When connecting switch with Console port, VT100 terminal emulation is recommended.
Configuration steps: at hyper terminal interface, open “file” menu, select “attribute”, and click
“configure” at the window, then select VT100 in the list.
