Mounting
9
the screws through the Ф6.5 positions in the following figure. Move the device in
direction 1 until the screws are in the Ф4 positions. Then tighten the screws.
Figure 10 Panel Mounting
Dismounting
Step 1: Loosen the four screws with a screwdriver. Pull the device upward until the four screws
are in the Ф6.5 positions in the following figure. Then remove the plate for panel
mounting from the four screws to detach the device from the wall or inner wall of the
cabinet.
Step 2: Loosen the screws completely with a screwdriver. Remove them from the wall or inner
wall of the cabinet. Then remove the plate for panel mounting from the rear panel to
complete dismounting the device.
Figure 11 Panel Dismounting
