Mounting
8
Dismounting
Step 1: Insert the head of a screwdriver into the opening of the spring locking piece at the bottom
from the left. Lift the handle of the screwdriver to open the spring locking piece of the
connecting seat, as shown on the left of the following figure.
Step 2: Move the device in direction 2 until the bottom of the device is detached from the DIN rail.
Then move the device in direction 3 and uplift the device until the top of the connecting
seat is detached from the DIN rail.
Figure 9 DIN-Rail Dismounting
3.2.2 Panel Mounting
Caution:
Purchase the plate (optional) for panel mounting.
Mounting
Step 1: Use screws to secure the plate for panel mounting to the rear panel of the device.
Step 2: Select the mounting position (on a wall or inner wall of a cabinet) for the device and
guarantee
adequate
space
and
heat
dissipation
(dimensions:
53.6mm×135mm×106.5mm).
Step 3: Punch four holes in the selected position according to the dimensions for panel mounting.
Insert four screws into the four holes respectively, and turn the screws with a screwdriver
until about a 5mm distance is left between each screw head and the wall.
Step 4: Align the four mounting holes on the plate for panel mounting with the four screws. Insert
