background image

▼ 

Operating hints

For optimal performance and RF reception:

  Place the receiver at least 8 inches (20 cm) away from all electrical devices, such

    as your monitor, speakers or external storage devices. If necessary, use the 
    extension cable to keep the receiver away from the computer. Plug the receiver into the 
    extension cable, and the extension cable to the computer.

  Avoid using the mouse on a metal surface. Metals, such as iron, aluminum or copper,

    shield the radio frequency transmission and may slow down the mouse’s response time 
    or cause the mouse to fail temporarily.

  The mouse will enter a suspend mode at the same time your computer does. To activate

    the mouse, simply move or click the mouse.

  If your computer has a metal case that contains aluminum or magnesium, use the 

    mouse to the side. The display panel may interfere with the radio frequency signal if you 
    use the mouse directly in front of the computer.

  Never use the mouse on a glass or mirrored surface as these surfaces will cause the

    mouse to fail temporarily.

  To maximize battery life, use the mouse on a white, or light colored surface. Dark

    surfaces cause the mouse’s light emitter diode (LED) light to glow brighter, which causes
    the battery to discharge more rapidly.

 Comfortable usage

Research suggests that physical discomfort and injury to nerves, tendons, and muscles 
may  be  related  to  repetitive  motion,  an  improperly  set  up  work  area,  incorrect  body 
posture, and poor work habits.

To reduce the risk of injury, follow these precautions:

  Stand, stretch, and move around several times every hour.

  Switch hands while performing tasks. Use shortcut keys to avoid repetitive or awkward

    mouse movements.

  Relax your shoulders and keep your elbows at your sides.  Adjust the keyboard’s

    position so that you don’t have to stretch to reach it.

  Adjust your position so that you don’t have to bend your wrists to type; avoid placing

    your wrists on a sharp edge. 

•  

If you feel discomfort or numbness in your hands, wrists, arms, shoulders, neck, or back

    while typing, consult a qualified medical professional.

English

Summary of Contents for KM002








Reviews: